Oberton 8NM200

SPECIFICATIONS

THIELE-SMALL PARAMETERS

Nominal Diameter
Impedance
Minimum Impedance
Power Capacity AES ¹
Program Power ²
Sensitivity
Frequency Range
Voice Coil Diameter
Voice Coil Material
Voice Coil Former
Voice Coil Winding Depth
Magnet Gap Depth
Cone Material
Basket
Magnet
Flux Density

8"/210 inch/mm
8 Ohm 
6.40 Ohm
200 W
400 W
(200-2000 Hz) 101 dB/W/m
100 – 4000 Hz
51 mm
Aluminium
Kapton™
10 mm
9 mm
Paper with glassfiber
Die cast aluminium
Neodymium
1.55T

Resonance Frequency
Mechanical Efficiency Factor (Qms)
Electrical Efficiency Factor (Qes)
Total Q (Qts)
Equivalent Air Volume (Vas )
Diaphragm mass ind. airload (Mms)
Voice Coil Resistance Re
Effective Diagram Area (Sd)
Peak Linear Displacement of Diaphragm (Xmax)*
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
V.C. Inductance at 1 kHz (Le)

83.90 Hz
11.30
0.208
0.204
12.11 Litres
16.60 grams
5.25 Ohms
202 cm2
±2.75 mm
0.217 mm/N
14.88 T.m
0.37 mH

MOUNTING INFORMATION 

1. AES standard. Power is calculated on rated minimum impedance. Measurement is in 18 L box enclosure tuned 82 Hz using a 60-2000 Hz band limited pink noise test signal applied continuously for 2 hours.
2. Program power is defined as 3db greater than AES Power Capacity.

* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.

Overall Diameter
Baffle Hole Diameter 
Number of Mounting Holes
Bolt Circle Diameter
Overall Depth
Net Weight

225 mm
187 mm
8 with dia. 6.5 mm
210 mm
81.5 mm
2.00 kg