Fane Sovereign Pro 10-300
  • Fane Sovereign Pro 10-300

Cere mai multe informatii despre Fane Sovereign Pro 10-300 la numarul de telefon 0766.332.366 sau discuta pe forumul Poweraudio.

Preţ: 397,96 Lei
Fără TVA: 334,42 Lei
2 bucati in stoc
Producător: Fane
Cod produs: Fane Sovereign Pro 10-300
Puncte de recompensă: 7
-
+

ELECTRO ACOUSTIC SPECIFICATIONS:
 

  • Nominal Chassis Diameter 10" / 254 mm
  • Impedance 4 /8 /16 Ohms available (data quoted for 8 Ohm version)
  • Power Handling 300 w (A.E.S.)
  • Peak Power (6dB Crest Factor) 1200 w (A.E.S.)
  • Usable Frequency Range -6dB 45 Hz - 4 kHz
  • Sensitivity (1 w - 1 m) 98. dB
  • Moving Mass inc. Air Load 37 grams
  • Minimum Impedance Zmin 6.8 Ohms
  • Effective Piston Diameter 8.46" / 214.88 mm
  • Peak Displacement Volume of Cone Vd 0.2 litres
  • Magnet Weight 56 oz
  • Magnetic Gap Depth 0.39" / 10 mm
  • Flux Density 1.1 Tesla
  • Coil Winding Height 0.70" / 18 mm
  • Voice Coil Diameter 2.5" / 63.5 mm


 

  • THIELE SMALL PARAMETERS:
     
    • FS Hz 58 Hz
    • RE Ohms 5.7 Ohms
    • Qms 6.08
    • Qes 0.34
    • Qts 0.32
    • Vas Ltr 41 litres
    • Vd litres 0.208 litres
    • CMS (mm/N) 0.211 mm/N
    • BL T/m 15.3 T/m
    • Mms (grms) 37 grams
    • Xmax (mm) 5.5 mm
    • Sd (cm2) 378 cm2
    • Efficiency % 2.36%
    • Le (1k Hz) 1.68 mH


    MOUNTING / SHIPPING INFORMATION:
     
    • Overall Diameter 11.16" / 283.4 mm
    • Width Across Flats 10.34" / 262.7 mm
    • Flange Height 0.305" / 7.8 mm
    • Baffle Hole Diameter F/M 8.97" / 227.83 mm
    • Baffle Hole Diameter R/M N/A
    • Gasket Supplied Rear
    • Fixing Holes 4x 0.218" diam on 10.625 PCD 4x 5.5 mm diam on 270 PCD
    • Depth 4.33" / 110 mm
    • Weight 11.02 lb / 5 kg
    • Recommended Enclosure Volume 0.17 - 0.52 cu ft / 5- 15 litres
    • Shipping Weight 12.56 lb / 5.7 kg
    • Packing Carton Dimensions 288 x 288 x 195 mm


    MATERIALS OF CONSTRUCTION:
     
    • Former Material Glass Fibre
    • Voice Coil Copper inside/outside wound
    • Magnet Material Ferrite
    • Chassis Die-cast Aluminium
    • Cone Curvilinear Paper
    • Surround / Edge Termination Polyvinyl Damped Double Half-Roll. Linen
    • Dust Dome Solid Paper
    • Connectors Push-button Spring Terminals
    • Polarity Positive voltage at red terminal causes forward motion of cone

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!
Rău Bun