Oberton 6NMB200

SPECIFICATIONS

THIELE-SMALL PARAMETERS

Nominal Diameter
Impedance
Minimum Impedance
Power Capacity AES ¹
Program Power ²
Sensitivity
Frequency Range
Voice Coil Diameter
Voice Coil Material
Voice Coil Former
Voice Coil Winding Depth
Magnet Gap Depth
Cone Material
Basket
Magnet
Flux Density

6.5"/170 inch/mm
16 Ohm 
12.79 Ohm
200 W
400 W
(200-3000 Hz) 95 dB/W/m
20 – 5000 Hz
51 mm
Aluminium
Glass fiber
12.5 mm
7 mm
Paper with glassfiber
Die cast aluminium
Neodymium
1.65 T

Resonance Frequency
Mechanical Efficiency Factor (Qms)
Electrical Efficiency Factor (Qes)
Total Q (Qts)
Equivalent Air Volume (Vas )
Diaphragm mass ind. airload (Mms)
Voice Coil Resistance Re
Effective Diagram Area (Sd)
Peak Linear Displacement of Diaphragm (Xmax)*
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
V.C. Inductance at 1 kHz (Le)

91.49 Hz
10.18
0.243
0.238
4,94 Litres
14,15 grams
10,60 Ohms
139 cm2
± 4.5 mm
0.214 mm/N
18,83 T.m
0.18 mH

MOUNTING INFORMATION 

1. AES standard. Power is calculated on rated minimum impedance. Measurement is in 9 L box enclosure tuned 70 Hz using a 100-2000 Hz band limited pink noise test signal applied continuously for 2 hours.
2. Program power is defined as 3db greater than AES Power Capacity.

* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.

Overall Diameter
Baffle Hole Diameter 
Number of Mounting Holes
Bolt Circle Diameter
Overall Depth
Net Weight

185 mm
145 mm
4 elliptic 5.5 / 6.5 mm
170/172 mm
82.5 mm
1.64 kg