Fane Studio 5FRK

Specifications:
 

• Nominal Chassis Diameter 5' / 127 mm
• Impedance 4 /8 /16 Ohms available
• Power Handling 50 w (A.E.S.)
• Peak Power (6dB Crest Factor) 200 w (A.E.S.)
• Usable Frequency Range -6dB 65 Hz - 7 kHz
• Sensitivity (1 w - 1 m) 90.5 dB
• Moving Mass inc. Air Load 7.9 grams
• Minimum Impedance Zmin 7.7 Ohms
• Effective Piston Diameter 4.2' / 106.68 mm
• Peak Displacement Volume of Cone Vd 0.022 litres
• Magnet Weight 18 oz
• Magnetic Gap Depth 0.25' / 6.35 mm
• Flux Density 1.42 Tesla
• Coil Winding Height 0.31' / 8 mm

Thiele Small Parameters:
 

• FS Hz 58 Hz
• RE Ohms 6.2 Ohms
• Qms 7.5
• Qes 0.38
• Qts 0.36
• Vas Ltr 10.9 litres
• Vd litres 0.022 litres
• BL T/m 6.85 T/m
• Mms (grms) 7.9 grams
• Xmax (mm) 2.5 mm
• Sd (cm2) 89.74 cm2
• Efficiency % 0.60%
• Le (1k Hz) 0.882 mH
  
  
  
  
  
  
  
  
  
  
  
  
   
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  • Mounting and Shipping Information:
     
    • Overall Diameter 6" / 152.4 mm
    • Width Across Flats 5.25" / 133.35 mm
    • Flange Height 0.27" / 6.9 mm
    • Baffle Hole Diameter F/M 4.63" / 117.60 mm
    • Baffle Hole Diameter R/M 4.50" / 114.3 mm
    • Gasket Supplied Front & Rear
    • Fixing Holes 4x 0.218" / 5.5 diam x 5.4688" / 138.8mm PCD
    • Depth 2.63" / 66.80 mm
    • Weight 3.1 lb / 1.37 kg
    • Recommended Enclosure Volume 0.7 - 3.0 cu ft / 2 - 10 litres
    • Shipping Weight 3.1 lb / 1.37 kg
    • Packing Carton Dimensions 156 x 102 x 143 mm
    
    
    Materials Of Construction:
     
    • Former Material Resin Bonded Glass Fibre
    • Voice Coil Polyamide-imide Coated Copper
    • Magnet Material Ferrite
    • Chassis Die-cast Aluminium
    • Cone Kevlar
    • Surround / Edge Termination Rubber Roll
    • Dust Dome Linen
    • Connectors 0.125' Tab / Solder
    • Polarity Positive voltage at red terminal causes forward motion of cone